Exo Terra Thermostat (600W) & Hygrostat (100W) with Day/Night timer

The Exo Terra Thermostat and Hygrostat with a Day/Night timer lets you build a well - managed heating and humidifying system. It maintains the perfect temperature and humidity, just like in desert and tropical settings. You can set the day and night temperature and humidity separately. For example, lower the temperature at night and increase the humidity, mimicking nature. This device prevents overheating in summer and undercooling in winter while keeping humidity on point. The dimming function keeps the temperature very stable, much more so than regular thermostats, and reduces temperature fluctuations in the terrarium. The easy - to - read LCD screen shows heating mode, day or night, and the current temperature and humidity. A red LED lights up when the heating device is on and turns off when the set temperature is reached. A blue LED indicates the humidifier is working and turns off when the set humidity is achieved. It's accurate, reliable, and simple to use. Just connect your heat mat, heat cable, ceramic heater, fogger, or humidifier. Set your preferred temperature and humidity and place the sensors where you want. When used with non - visible light heat sources like Exo Terra's Heat Mat, it creates a 24 - hour heating system that won't disrupt your pet's routine. If using with a visible - light bulb, set the night - time temperature to 10°C (50°F) to avoid disturbing your pet at night.

Using this Exo Terra Thermostat and Hygrostat is a breeze. First, connect your heat mat, heat cable, ceramic heater to the thermostat part, and a fogger or humidifier to the hygrostat part. Then, set your preferred temperature and humidity on the device. Place the heat and humidity sensors in the spot in the terrarium where you want to measure these conditions. You can set different settings for day and night, just like in nature. Remember, when using a non - visible light heat source, it won't disrupt your pet's normal routine. But if you're using a visible - light bulb, set the night - time temperature to 10°C (50°F) to prevent the light from disturbing your pet. Keep the device clean and dry. Check the connections regularly to make sure everything is working properly. If you notice any issues, like inaccurate readings or the LEDs not working as they should, contact the manufacturer for help.